How to Use Hair Snaps to Secure Braid Ends

Hair snaps are where Snapaholics got its name, and they are still one of the handiest little things in a braiding kit. A snap is a tiny hinged clip that closes with a click. On the end of a braid or twist it keeps the hair from unraveling, holds beads in place without foil, and adds a bright finishing touch.

If you have never used them, snaps can feel fiddly for the first few braids. Once you get the wrap-and-click motion down, they are quicker than rubber bands and much easier to take out. Here is how we do it.

Why snaps instead of rubber bands or foil?

MethodGoodNot so good
Tiny rubber bandsCheap and grip wellCan be tight on fine ends and hard to remove without snagging or breaking hair
FoilThe old-school way to keep beads from sliding offCrinkly, can have sharp edges, and tears or slips off over time
Hair snapsOpen and close by hand, reusable, decorative, no knotsNeed a short tail of hair to wrap around the hinge

That last point is the only real trick to snaps, so let's start there.

What you need

  • Hair snaps, enough for every braid plus a few spares. A package of our Pink Mix Flower Snaps holds approximately 50 snaps.
  • A rat-tail comb for parting and smoothing.
  • A spray bottle with plain water, or water with a little leave-in conditioner.
  • Beads and a beader if you are adding beads. Our Hair Beads page carries both.
Package of Pink Mix Flower Snaps: double-sided flower hair snaps in assorted pinks and white
Pink Mix Flower Snaps: petite, double-sided flowers about 1.7 cm wide.

Step by step: securing a braid end

  1. Braid all the way down. Keep braiding until there is only a short tail of loose hair left at the end. You need just enough to wrap around the hinge of the snap.
  2. Smooth the tail. Mist the end lightly and smooth it between your fingers so there are no stray hairs sticking out.
  3. Open the snap. Hold it with the decorative side facing out, the way you want it to show.
  4. Wrap the end around the hinge. Wrap the very end of the section of hair around the hinge of the snap. One or two turns is usually enough.
  5. Close it. Press the snap shut so the wrapped hair is captured in the closure. You will feel and hear the click.
  6. Test it. Give the snap a gentle tug. It should hold without sliding. If it moves, open it and add one more wrap.

That is all there is to it. After a dozen braids your fingers will do it without thinking.

Using snaps to hold beads (no foil needed)

Snaps double as bead stoppers. Thread your beads onto the braid with a beader, slide them up a little, and leave enough tail below the last bead to wrap around the hinge. Close the snap right under the beads and they cannot slide off.

A few tips for beaded ends:

  • Do not push beads all the way up to the scalp. Keeping them toward the ends lets the braid move and puts less weight on the roots.
  • Mix sizes thoughtfully. A big bead right above the snap can hide the snap completely, which some parents love and others do not.
  • Check the snaps on beaded braids every day or two, since beads add weight and swing.
  • Beads and snaps are small parts. If your child is very young, please read our hair bead safety guide before you start.

Snaps on twists, cornrows and short ends

Two-strand twists

Twist ends are notorious for coming undone. A snap at the tip closes the twist neatly and stops it from unraveling. Our guide to accessories for locs and twists has more ideas.

Cornrows

When a cornrow runs off the scalp into a loose braid, snap the end of that tail just as you would a regular braid. Snaps in a matching color on every row look polished, while a rainbow mix looks playful.

Very short ends

If the tail is too short to wrap around the hinge, the snap will not grip. Try braiding a little further down, use a smaller section, or switch to a mini barrette placed higher up on the braid instead. Mini daisy and bow barrettes work well for this.

Troubleshooting

The snap keeps sliding off

The tail is usually too short, too thin or too slippery. Braid further down, add one more wrap, or use a little less leave-in or oil on the ends, since very slick hair is harder to grip.

The snap will not close

There is too much hair wrapped around the hinge. Unwrap a turn and try again, or split a very thick end into a smaller section.

The ends look frizzy around the snap

Smooth the tail with a little water before wrapping, and wrap it neatly in one direction rather than bunching it.

My child says it pinches

Check that no hair from a neighboring braid got caught in the closure, and that the snap is sitting at the tip of the braid rather than close to the scalp.

Taking snaps out without damage

Always open the snap and unwind the hair from the hinge. Pulling a closed snap off the end of a braid can rip or break the ends you have worked so hard to protect. Take the snaps and beads out first, before you start unbraiding. Our guide on taking down braids fast without damage walks through the rest of the process.

Snaps are reusable. Rinse them in warm soapy water, let them dry completely, and store them by color in a jar or zip bag so they are ready for the next style.

Choosing snaps

Snaps come in bright colors, pastels, metallics and black, plus flower shapes like the double-sided flowers in the picture above. For everyday wear, many parents like to keep one neutral set and one fun set. Match them to school colors, an outfit or a holiday, or let your child choose. You will find our full range on the Hair Snaps page.

Keep reading